Victus Pencil -10 USSSA Baseball Bat: VSVIBP10 | JustBats.com (2024)

FAQs

How do you crack a baseball bat? ›

Start off by swinging at about 50% of your typical swing. Slowly work your way up to full strength over the first 100 swings. Be sure to rotate the barrel ¼” after each swing to ensure you break-in the entire composite barrel. NEVER break-in your bat at a batting cage that uses yellow dimpled balls.

When selecting your new wood bat, weight is a major factor to consider during the selection process. The weight, also known as its “drop” is a negative number showing the bat's length to weight differential. For example, if a bat is 33 inches and has a drop weight of (-3) the bat will weigh 30 ounces.

LENGTH, WEIGHT, WEIGHT DROP – AND WHY THEY MATTER. Many baseball players believe a longer bat means better plate coverage – but that's not always the case. A longer bat is often swings heavier, and if it's too long for you, can reduce your swing speed and keep you from catching up to certain pitches.

The more fibers that are broken down, the greater the trampoline effect and the bigger the bounce off the bat is.

The Break-In Period

Now, let's get down to brass tacks. The break-in period for an Easton BBCOR bat can vary depending on factors such as material composition, frequency of use, and personal preference. However, a common ballpark figure ranges from 150 to 200 hits.

Unfortunately, all bats have a limited life, and at some point, your bat will lose its pop. It's important to know when this has happened, or better yet, as it's happening, so you can make plans to replace it.

Wooden bats do have a smaller sweet spot which makes them harder to hit with for everyone. So, if you have a young and developing player, they are going to have an easier time hitting with a metal bat. If you don't think they'll ever go professional, they probably won't have much need for using a wooden bat.

Yes, and that's how it should be. The most expensive bats are made from the best materials, usually a mixed metal or composite.

So, using a heavier bat should result in faster hit balls, which means the hit ball will travel farther. If a player can maintain the same bat swing speed with a heavier bat, the heavier bat will produce higher batted ball velocity and an increase in distance.

How much should I spend on a bat? ›

A: Bat prices range roughly from $50 to $500. The appropriate amount to spend depends on the player's age, skill level, and family finances. If your player is new the sport, focus on an affordable bat that they can swing properly.

As you hit pitch after pitch after pitch, the structure of the wood begins to break down. This is the natural wear and tear of a wood bat. As those spots develop, a hard-hit ball or contact that is not quite square can cause the bat to fracture. One other condition to consider is the weather.

If the splits are less than one inch long then one can help stopping them develop further by soaking superglue into the crack repeatedly until the crack has filled and hardened. When the splits are noticeably longer the bat is best sent to a reputed bat repairer or if still under warranty returned to the manufacturer.

Just like a fielding glove, a bat needs to be broken in a certain way for it to reach its maximum potential. Do you know what affects your bat, its performance, and its lifespan? Weather plays a big factor with the barrel which can also weaken the composite in some areas if not taken into consideration.