Why does my Samsung dryer say check filter but filter is clean?

The check filter light comes on when it thinks the dryer isn't venting properly which is monitored by a thermistor sensor inside the dryer. Now since the error comes on without the dryer even running for awhile, either your sensor has failed or the control board is bad and not reading the sensor properly .

How to fix filter error on Samsung dryer?

- Clean the lint filter or the heat exchanger . -Check for a clogged lint screen. -Check if the vent system is restricted. -If this information code remains, please contact a Samsung service centre.

Why does my dryer keep saying to clean the filter when it's clean?

If the warning light is on but the lint screen is clean, then you may need to clean the dryer ducts . Look for the exterior exhaust hood. It's usually on the exterior wall on the other side of the dryer. Unscrew the hood and scoop out any lint that you find.

Where is the filter sensor on a Samsung dryer?

The lint filter is typically located at the bottom of the dryer entrance . Follow the guide below to see how you can clean the lint filter on your applicable model. *If the NC/NC1 code persists after checking and cleaning, please contact an authorised service centre to request further support.

Why does my Samsung dryer filter check blink 5 times?

When either of these lights are blinking, this means that the dryer is getting too hot. The most common cause is a clogged lint screen or vent system trapping heat in the dryer.

How do I reset my Samsung filter?

Resetting the water filter light Standard models: Find the Filter Reset button on the control panel. Press and hold for three seconds. Family Hub models: Go to Apps > Fridge Manager > Fridge Settings > Water Filter, then tap Reset. Models with arrow buttons: Use arrows to navigate to More Options > Filter Reset.

What happens if you don't change dryer filter?

Otherwise, a fire can occur due to a buildup of lint that prevents the dryer from exhausting hot air. The unit can then overheat, causing flammable materials to ignite. At the very least, the appliance may sustain major damage.

What happens if you don't clean dryer lint filter?

If the lint filter isn't cleaned for the dryer, it is possible that it could catch on fire . Not cleaning the lint filter can be a serious fire hazard so be safe and clean the lint filter before every use.

Why does my Samsung dryer keep saying filter check?

When the information code “Check filter” appears on the control panel, it means the lint filter has a problem . Check the lint filter assembly. If this continues, call for service.

How do you reset the filter light on a Samsung dryer?

The check filter light comes on when it thinks the dryer isn't venting properly which is monitored by a thermistor sensor inside the dryer. ... Try to unplug the dryer or flip the circuit breaker off for 5 minutes and it should reset.

What are the error codes on a Samsung dryer?

Samsung Dryer Codes and Their Causes Code(s) Meaning bE, 6C2, bC2, bE2, 6E, 6E2 Panel button(s) jammed 9E1, 9C1, 2E, 9E Voltage issue FE, 1FC, FC Power source disruption oD, 1 AC7, 3C, HC2 Dryer sensor issues 4 more rows

Samsung Dryer Filter Check Light Blinks 5 Times (2024)

1. What should I do when the filter alert blinks on the control panel?

9 jan 2024 · If the filter sign appears on your appliance's display, it means that the lint filter must be cleaned. Clean the lint filter after each load. If ...
FAQ for Samsung Washing machine. Find more about What should I do when the filter alert blinks on the control panel? with Samsung Support.

Code(s)	Meaning
bE, 6C2, bC2, bE2, 6E, 6E2	Panel button(s) jammed
9E1, 9C1, 2E, 9E	Voltage issue
FE, 1FC, FC	Power source disruption
oD, 1 AC7, 3C, HC2	Dryer sensor issues

Samsung Dryer Filter Check Light Blinks 5 Times (2024)

FAQs